Hamilton Cams 188-220 Cast Cam .310″/.320″
- In stock
This cam has outperformed any cam we have tested it against to date, from idle to 4,200 rpm. It is also the largest drop-in cam that we sell.
Use with 62mm or larger single turbos or larger twins. Install intake on a 99 centerline, performance springs and pushrods are recommended. If you have had your head or block surfaced, you need to verify piston to valve clearance.
For it to be “drop in” on a 12v you will need no more than .018″ piston protrusion and at least .055″ valve face depth with a standard head gasket and a 99 intake centerline. On a 24v you will need no more than .018″ piston protrusion and at least .038″ valve face depth with a standard gasket. If you do not meet the minimum requirements for piston to valve clearance, don’t worry, you can still run an oversize headgasket or cut valve reliefs.
This cam has outperformed any cam we have tested it against to date, from idle to 4,200 rpm. It is also the largest drop-in cam that we sell.
Use with 62mm or larger single turbos or larger twins. Install intake on a 99 centerline, performance springs and pushrods are recommended. If you have had your head or block surfaced, you need to verify piston to valve clearance.
For it to be “drop in” on a 12v you will need no more than .018″ piston protrusion and at least .055″ valve face depth with a standard head gasket and a 99 intake centerline. On a 24v you will need no more than .018″ piston protrusion and at least .038″ valve face depth with a standard gasket. If you do not meet the minimum requirements for piston to valve clearance, don’t worry, you can still run an oversize headgasket or cut valve reliefs.
